标题: Keyless entry 用不鸟了 [打印本页]

---

作者: limiemie    时间: 2013-4-30 15:13     标题: Keyless entry 用不鸟了

2004年的mini, 前阵子车子没电了，jump start 以后钥匙的keyless entry就没用了， 去mini service centre问，他们说需要reprogramming我的车， $135／hr. 重点是，就算做完reprogramming,他们也不能保证我的钥匙就能用，天理何在啊？ 所以想在这问问大家意见，有没有更好的办法？

---

作者: autonic    时间: 2013-4-30 20:32

PROCEDURE

Initialize remote key as follows:

1.) Close all doors

2.) Switch the ignition switch to KL-R (first turn), switch back off within 5 seconds and remove the key

3.) Within 30 seconds, press and hold the unlock button and at the same time, press and release the lock button (3) times. (Must be completed within 10 seconds)

4.) Release both buttons. The doors will lock/unlock to signal a successful initialization.

5.) If additional keys need to be initialized, repeat steps 3-4 within 30 seconds

6.) Switching the ignition to KL-R completes the initialization



Let me know if you need additional help.

---

作者: limiemie    时间: 2013-4-30 22:17     标题: 回复 2# 的帖子

没有用。Mini centre的人今天也试了。

---

作者: autonic    时间: 2013-5-1 18:20

check fuse to the BCM or related module, since right after jump start, it seems some fuse broken.

---

欢迎光临 论坛首页 (http://mail.victoriabbs.com/bbs/)

Powered by Discuz! 6.0.0